Product Description

power supply 24 v 200 watt lighting accessory DALI LED driver

Feature

·Output constant Voltage

·Range 100-265VAC

·Built-in active PFC function

·Efficiency up to 90%

·Protections:short circuit/over load/ over circuit/over temperature

·Cooling by free air convection

·IP20 design for indoor installation.

·Dimming function: Built in DALI interface dimming function conform to DALI Protocol IEC62386

·Dimming range from 1% to 100%

·Suitable for intelligent LED lighting

·Compliance to worldwide safety regulations for lighting

·Suitable for dry locations

Specification

Model		KV-12180-DA	KV-24200-DA
Output	DC Voltage	12V	24V
	Voltage Tolerance	±0.5V
	Rated current	0 - 15A	0 - 8.33A
	Rated power	180W	200W
Input	Voltage Range	100-265VAC
	Frequency Range	47 - 63HZ
	Power Factor	PF≥0.98/120VAC PF≥0.98/230VAC PF≥0.95/265VAC(Full loading)
	Full Load Efficiency(Typ.)	89%	90%
	AC Current(Max.)	1.78A	1.96A
	Leakage current	<0.5mA
Protection	Short Circuit	Protection type: Hiccup mode, recovers automatically after fault condition is removed.
	Over Load	≤120%
	Over Circuit	≤1.2*Iout
	Protection Class:	Ⅰ
	Over temperature	100℃±10℃ shut down o/p voltage, re-power on to recover
Others	Weight	1.6Kg
	Dimension	2567847mm(LWH)
	packing	340280185mm/10pcs/CTN
Notes	1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.