Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Quick Installation Remote Control No Wiring Ceilling lamps Waterproof Wireless Intelligent Light Switch Remote Control Light Switch
The wireless remote control wifi light switch is frameless type and can not be used alone , which should be used together with receiver like 433mhz receiver or WiFi&433mhz receiver
2-gang switch with 2 receivers
Parameters of Wireless Switch SW-NK2 | |||
Dimensions: | 86x86x13 | mm | |
Waterproof Rate: | IP54 |
| |
Installation Method: | Dual adhesive tape of 12mm or screws | ||
Operating Voltage (Battery Type) | 2.0~3 (CR2032) | V | |
Wireless Parameter | Frequency | 433.932 +/-75KHz | MHz |
Wireless Range | Outerdoor≥700M;Indoor≥50M | M | |
Panel lifespan | ≥600,000 times |
| |
Battery lifespan | CR2032 | ≥300,000times |
|
| Humidity | 0~95% |
|
Storage Temperature | -40~80 | ℃ | |
- Remote ON/OFF – Turn electrical devices on/off from anywhere
- Wireless Frequency--802.11b/g/n &433.932mhz
- App Support – Free iOS and Android mobile App King Smart
- Sync Status – Real-time device status provided to App
- Timing – Set timers in several groups to turn on/off at specified time
- Share Control – Control your smart home together with your family
- Voice Control – Works perfectly with Amazon Alexa, Google Assistant
Parameters:
| Type | WIFI+433Mhz receiver |
| Working voltage | AC 80~275 |
| Mixed load | 1000W(LED) |
| Mechanical times | >400(thousand times) |
| Wireless Frequency | 802.11b/g/n &433.932mhz |
| Product dimensions | 75x28x28.5mm |
| Sync Status | Real-time device status provided to App |
Use receiver into EZ mode
1. Press and hold the key on receiver around 5s
2. LED indicator blinks in red →in green, then loosen your grip
3. Open King Smart APP, login your account.
4. Tap “Tap+ Add Device”
5. Choose EZ Mode, Tap“Confirm green indicator rapidly blink”
6. Enter Wi-fi Password, Tap“ NEXT”
7. The phone is connecting the device
8. After connecting , Tap control the lamps
Use switch into EZ Mode
1.Press and hold paired switch for around 30s
2. LED indicator blinks rapidly then twice slowly, loosen your grip
3. Press the switch again
4. LED indicator on receiver blinks in green rapidly
5. Open King Smart APP, login your account.
6. Tap “Tap+ Add Device”
7. Choose EZ Mode, Tap“Confirm green indicator rapidly blink”
8. Enter Wi-fi Password, Tap“ NEXT”
9. The phone is connecting the device
10. After connecting , Tap control the lamps
Press and hold receiver button for 2s, loosen your grip when LED indicator
blinks in red, press a switch to pair, Switch open and learning success.
Press and hold paired switch for around 20s LED indicator blinks rapidly, then loosen
your grip, press a new one to pair, Switch open or close and learning success.
Press and hold paired switch for around 60s, LED indicator changes from; blinks
rapidly → secondly 8 times slowly → thirdly blinks 9 times at slower speed → finally
once at slowest speed ,then loosen your grip, press the switch again, switch open or close and delete success.
Press and hold the key on receiver for around 20s , LED indicator changes from :
blinks in red→ then in green → finally in red, then loosen your grip, and all switch
codes learned from the receiver will be deleted.
Pass CE, CQC, FCC, RoHs certification.
Q: Can I only buy your wireless light switch?
A: Wireless switch must be programmed with receiver as a kit for application
Q: Can I print out brand and logo on the switch?
A;Yes, silk printing or laser engraving is available
Q: Is the Maxcell CR2032 easy to buy in the market if it runs out?
A: Yes, quite normal battery type in the market
Customer Reviews total 0 items