Brand：	none
Address：	Guangdong Huizhou
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

Products Details

Thanks for choosing reﬂector module LED linear light. This light combines innovative optical and mechanical design features to achieve a soft and uniform light distribution. Our reﬂector ledliner light has a dedicated driver and elegant appearance to make a space reﬁned and smart, perfectly adapted to fashion or design needs.

◈ FEATURES

◪ Revolutionary Reflector design to offer 120lm/W, 140lm/W high efficiency lighting output;

◪ Lower glare UGR<16, all the value is lower than 19;
◪ Available in Traic dimming, 1-10V dimming and DALI dimming & intellgent controls
◪ White, Silver, and Black housing available;
◪ With TUV isolation constant current driver,PF>0.95
◪ It could be used in the sho[, store and all other commercial place

◈ PERFORMANCE

◈ TECHNICAL DATA SHEET

DWLR436-55
Photometric Parameters
NO.	Item	Parameter
1	LED	High luminous ﬂux SMD LED
2	Luminous Efﬁciency	120LM/W
3	CCT	3000K,4000K 5700K (warm white, natural white, cool white)
4	CRI	≥80
5	BeamAngle	75°
6	LED Lifespan	≥50000 Hours
Electrical Parameters
7	dirver input voltage	AC220-240V /50～60Hz
8	OutputVoltage	DC30-40V
9	Power Supply Efﬁciency	≥88%
10	Power Factor	≥0.95
11	Protection Class	Class II
General Parameters
12	Rating IP	IP 40
13	Material	Aluminum + PC
14	Frame Finishing	Aluminium silver color
15	Installation	Suspended, Surface mount, Recessed
16	WorkingTemperature	-20～+45℃
17	StoringTemperature	-40～+60℃
18	Working Humidity	15%~90%RH
19	Certiﬁcate	CE RoHS

◈ DIMENSION

Model No.	Efficiency	power	CCT	Lumen	Size
DWLR436-55	100lm/W	36W	3000K 4000K 5700K	3600lm	11405558mm
DWLR448-55	100lm/W	48W	3000K 4000K 5700K	4800lm	11405558mm
DWLR536-55	100lm/W	36W	3000K 4000K 5700K	3600lm	14505558mm
DWLR548-55	100lm/W	48W	3000K 4000K 5700K	4800lm	14505558mm

◈ INSTALLATION INSTRUCTION

bgmETHIN

Method A: Suspending

1. Tighten the set screws to fix 4 strip corners at both ends 2. Fix the lifting brackets and cable holders at both ends with screws

3. Fix the bases on the ceiling according to the drawing 4.String one end of the sling into the cable holder;

and install the cables into the bases.

Method B: Ceiling Installation

The two ceiling brackets are screwed to the ceiling, and the 2. Install the lamp into the ceiling brackets and lock the 2 brackets are installed within lamp length. screws on the ceiling brackets;

Mehod C: Connected with End Caps

1. Remove the two small pieces at the top of the end caps; 2. Use the screw to fix the bar connectors to one end of the products, then instert another products to be spliced into the bar connectors and lock the machine screw;

Method D: Connected without end caps

Remove the black cover and end cover, and fix the bar 2. Instert another product to the bar connector and lock the connectors on the side of the product with set screws; machine connectors , install all the black cover.