Product operation Instructions
Starfish Light is a waterproof product, it consists of three "AAA" batteries to provide power supply,

 it can emit thunder-and-lightning colorful color, and emit brilliant colors in the water at night, creates a
romantic, noble, elegant light show to you, and can be used for indoor outdoor  faceplate, fish tanks, and with Use sucker adsorption it on smooth walls or glass, makes your life more fun.
Starfish Light use high brightness RGB lamp beads, soft lighting, pure colors, good brightness, long life, three "AAA" batteries provide power, the battery can be replaced, It is easy to carry, and equipped with a remote control

1.Voltage:4.5V (3pcs AAA dry cell power supply)

2.Standby current: ≤10μA.
3.Multifunctional button for easy operation. RGB LED lights color.
4.Working Mode:
a.Electrify the device won't auto work.
b.Short press the Multifunctional button 0.5 seconds to turn on the lights. Long press the Multifunctional button for 3 seconds to power off.
c.The working will last two hours after the last button press. Then it will auto power off.

NOTE: Always make sure the product is thoroughly dry before inserting batteries.
1) Turn the back cover counter clockwise to open.
2) Insert three"AAA"batteries with correct polarity (+,-) following the illustration inside the battery compartment.
3) Replace the back cover, turning clockwise until snug, Besure the gasket is clean and properly seated.

1) Starfish Light can be installed on the wall of SPA pool (SPA Pool material thickness of no more than 0.2

inches), product on the inner wall of the pool, the iron sheets on the outer wall to magnets fixed product by suction, at the same also can be used adsorption outdoor umbrellas.
2) Through the double sucker, while adsorbed on the back of the product, the other side can be adsorbed on a smooth surface