Newest!! RF 2.4G DLV003 4 in 1 4 zones wireless DIM CCT RGB RGBW universal led strip controller 

 

4 in 1 2.4GHz wireless-sync-control RF remote controller-DIM/CCT/RGB/RGBW

Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with five interfaces, including V+ is extremely common interfaces, the other four for the 4 channels output control interface. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through RF remote control. Especially, it is integrated 4 optional programs for different color type LEDs, contains single color/CW+WW/RGB/RGBW. It means only one item stock for 4 types applications.

It means only one item stock for 4 types applications.

Product Feature

l  Designed as 4 in 1 controller for DIM/CCT/RGB/RGBW constant voltage LED lights.

l  DC12-24V, four channels output, Max. load current: 4CH*6A; Max. load power: 288W/12V; 576W/24V.

l  Adopts RF remote control, no need line-of-sight. Control range up to 20 meters.

l  Wireless-sync-control in both static color and dynamic modes, unlimited by remote control distance.

l  Memory function, each time power-on reserve the mode which stop in the last power-off.

l  Perfect control effect, including 1024 static colors(RGB/RGBW) and soft dim function.

l  The brightness of static color is adjustable, 1024 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.

l  Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

l  Short circuit protection.

l  Warranty of this product is three years, exclude the artificial situation of damaged or overload working.

Technical Parameters

Interface Specifications

Direction for use

Step 1: Connect the load wire at first, followed by the power wire, please ensure short circuit can not occur between wires before turning on the power;

Step 2: Setting the type of output as blow, please ensure the DIP switch in correct state according to the loading LED’s type:

Step 3: Matching the code with remote. The receiver can not be controlled by remote control before this step. Matching code operation will set correct program in remote control according to receiver’s output type and also achieve unique-control. Please read “About RF code” part for operation instruction.

(Tips: Please ensure to set output type before matching RF code, or will be asked for re-matching operation)

RF remote button functions

1 color ring and 12 buttons in total, the function of buttons are shown as below:

Type 1: Single color

Type 2: CW+WW

Type 3: RGB

 

Typical Applications

About RF code.

The biggest advantage of this system is that it can not only solve the cabling problem in engineering wirelessly, but also realize a wired-like operation experience. In order to facilitate the early testing and debugging of the project, the factory status of the receiver is normally unpaired and each remote controller has a unique code value. The user should perform the matching work of the remote controller and the receiver during the installation of the project to avoid the mutual influence of the radio frequency remote control technology during the later use.

Please pay attention to the following 3 points before operation:

1) All equipment in the complete system after installation should have a unified and unique code value, so as to achieve the security and stability of the system.

2) The receiver can only store one code value and cannot be overwritten. Before learning the new code value, it is necessary to clear the original code of the receiver; the remote controller can only save one code value but can be overwritten and can also restore the factory settings. In order to facilitate the later maintenance, the three components that may be involved in the system (including receivers, handheld remote controllers, and panel remote controllers) can realize mutual learning of code values.

3) Since the receiver performs code value learning in the power-on state, in order to avoid confusion in the area, it is recommended that each area has an independent power switch so that the power of other areas can be easily cut off when the code is being operated.

(1)Code pairing operation: means that the receiver will only be controlled by the value code remote controller.

(2)Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote controller, and can learn to a new code.

(3)Code learning operation between remote controls: Used to unify system code values or copy a new remote controls.

Since each remote controller has its own unique code at the time of delivery, when there are multiple remote controllers in one system, one of them (for example, remote controller A) must be selected as the system code value, and the code value of the rest remote controllers (for example, remote controller B) should be copied to the same one.

(4) The remote controller restores the factory setting: it means that the remote controller will be restored to the factory's unique code value.

About installation of remote control’s bracket:

1.Accessories include: bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pc.

2. There are 2 options for bracket installation:

1) Using screw and expansion tube make drilling installation (suitable for uneven and ash surface);

2) Using 3M foam sponge glue make free drilling installation (suitable for flat no ash surface).

Product information for placing order