New!! New 2.4G single color switch LED Remote Control RFBT15 

2. Features:

1) Working voltage: 3V (AAA*2);

2) DIM/CCT/RGB/RGBW 4 in 1;

3) Come with holder, easier access and keeping;

4) Easy to access and store with magnetic suction;

5) Circular knob design, unique interface and easy operation;

6) Functions: ON/OFF, dim function, colors, dynamic modes;

7) Adopts RF 2.4GHz wireless control, remote control distance up to 30m and no directional;

8) RFBT15 compatible with HD/HC/QD/QC/DLC/DLS/DLK/T2/T3 series products, please contact hoion for more information;

9) 3 years warranty.

3. Technical Parameters

4. Control Function

Function:

DIM (work with single color receiver)

ON/OFF: Short-click

Adjusting brightness: Rotating/ Pressing+Rotating (Turning from modes to adjust brightness:)

Modes: Double-short-click

CCT(work with CW+WW receiver)

ON/OFF: Short-click

Adjusting brightness: Rotating/ Pressing+Rotating (Turning from modes to adjust brightness:)

Adjusting CCT: Pressing+Rotating

Modes: Double-short-click

RGB(work with RGB receiver)

ON/OFF: Short-click

Adjusting brightness/speed: Rotating

Adjusting color: Pressing+Rotating

Modes: Double-short-click

RGBW(work with RGBW receiver)

ON/OFF: Short-click

RGB/W switching: 2s-long-pressing

Adjusting brightness/speed: Rotating

Adjusting color: Pressing+Rotating

Modes: Double-short-click

Hotkey: 3 times-short-click to overall ON/OFF

Tips. More details of the functions are showed in the receivers instruction.

5. Wireless remote control code value setting method

The number of controllers and remote controls in one system is unlimited. 2.4G Smart system has one unique RF code for communication. Each controller and each remote control can remember only one RF code, recorded in the first programing. New RF code can be recorded after delete the old one.

Code matching operation: the receiver will only be controlled by the value code remote control.

Code clearing operation: that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote control, also can be paired to a new code.

Code learning operation between remote controls: Used to unify system code values or copy a new remote control.

Since each remote control has its own unique RF code at the time of delivery, when there are multiple remote controls in one system, one of them must be selected as a main, and other remote controls should copy its RF code.

1) Main remote control: Press and hold “C” key for 5 seconds. The indicator of the remote control will flash quickly, means it enters the pairing code transmission status.

2) New remote control: Press and hold “B” key for 5 seconds, indicator will turn from 100% to off means it enters learning code status.

3) Indicator of the new remote control flash three times after successful code learning.

Remote control RF code learning from controllers

1) Turn off the power supply of the controllers.

2) Press and hold “B” key for 5 seconds until indicator of remote control turns off.

3) Turn on the power supply of the controllers. Indicator of the remote control flashes three times after successful code learning.

Note: The distance from controllers to remote controls should be less than 2 meters.

Restoring factory settings of remote control

1) Press and hold “B” key for 20 seconds until indicator of remote control process the state as 100% -off-100%.

2) Press “D” button to submit and finish the operation. Indicator of the remote control will flash three times after successful operation.

6. Remote control accessories installation instructions

Accessories include holder 1pc, 3M foam sponge glue 1pc,AAA batteries 2pcs.

Installation instruction:

1)       Using 3M foam sponge glue make free drilling installation of the holder onto the suitable wall or furniture surface.

2)       Placing Knob on the holder to operate the controlling, or take the knob and use it on any tabletop as convenience.

7. Compatible family

8. Packing

Product information for placing order