Newest!! D002 4CH 4 in 1 led strip controller with RFBK-RGB led remote control

Product Features

l  Designed for DIM/CCT/RGB/RGBW constant voltage LED lights.

l  DC12-24V, four channels output, Max. load current: 4CH*4A; Max. load power: 192W/12V; 384W/24V.

l  Adopts RF remote control, no need line-of-sight. 4 zones separately control or all-control.

l  Wireless-sync-control in both static color and dynamic modes, unlimited by remote control distance.

l  Batch-operation is available for RF code matching/clearing between remote control and receivers.

l  Memory function, each time power-on reserve the mode which stop in the last power-off.

l  Perfect control effect, including 1024 static colors(RGB/RGBW) and soft dim function.

l  The brightness of static color is adjustable, 1024 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.

l  Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

l  Warranty of this product is three years, exclude the artificial situation of damaged or overload working.

Technical Parameters

Dimensions

Interface Specifications

Direction for use

Step 1: Connect the load wire at first, followed by the power wire, please ensure short circuit can not occur between wires before turning on the power;

Step 2: Setting the type of output as blow, please ensure the indicate light in correct color according to the loading LED’s type:

(Indicate light color & output type)

Step 3: Matching the code with remote. Before matching the code, receiver can be controlled by any remote control in any zone (the functions are according to receiver’s output type which was set in Step 2). Matching code operation will set the receiver to correct zone and also achieve unique-control. Please read “About RF code” part for operation instruction.

Wireless-synchronization function

Receivers will transmit the control signals from the remote control and self-inspection the work statues for each other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also dynamic mode, to achieve wired-like operation experience.

RF remote button functions

1 color ring and 12 buttons in total, the function of buttons are shown as below:

 (Note: B+, B- is universal for RGB and CCT, adjusting RGB brightness after color ring operation, or adjusting CCT brightness after CW-CCT+/ CW-CCT-/ CW-ON operation)

Standard color changes as follows:

Typical Applications

About RF code.

The biggest advantage of this system is that it can not only solve the cabling problem in engineering wirelessly, but also realize a wired-like operation experience. In order to facilitate the early testing and debugging of the project, the factory status of the receiver is normally unpaired and each remote controller has a unique code value. The user should perform the matching work of the remote controller and the receiver during the installation of the project to avoid the mutual influence of the radio frequency remote control technology during the later use.

Please pay attention to the following 3 points before operation:

1) All equipment in the complete system after installation should have a unified and unique code value, so as to achieve the security and stability of the system.

2) The receiver can only store one code value and cannot be overwritten. Before learning the new code value, it is necessary to clear the original code of the receiver; the remote controller can only save one code value but can be overwritten and can also restore the factory settings. In order to facilitate the later maintenance, the three components that may be involved in the system (including receivers, handheld remote controllers, and panel remote controllers) can realize mutual learning of code values.

3) The clearing operation should be finished within 1 minutes after the receiver is powered on. Therefore, during the clearing operation, ensure that the lights in other areas are turned off or the power-on time exceeds 1 minute to avoid other areas being cleared.

4) Since the receiver performs code value learning in the power-on state, in order to avoid confusion in the area, it is recommended that each area has an independent power switch so that the power of other areas can be easily cut off when the code is being operated.

(1)Code pairing operation: means that the receiver will only be controlled by the value code remote controller.

(2)Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state. Then it can’t be controlled by any remote controller, and can learn to a new code.

(3)Code learning operation between remote controls: Used to unify system code values or copy a new remote controls.

Since each remote controller has its own unique code at the time of delivery, when there are multiple remote controllers in one system, one of them (for example, remote controller A) must be selected as the system code value, and the code value of the rest remote controllers (for example, remote controller B) should be copied to the same one.

Product after-sales advantages:

1. There is no power-on time limit for matching code, only need to power on the receiver;

2. Since the code value of the receiver cannot be covered, the new controller pair code won’t affect the controller already fixed code;

3, The same model or compatible remote control can copy the code value between each other to achieve the same control function;

4. If the remote control which matched code with the receivers is lost or does not work properly, it is not necessary to re-clear and re-code all the receivers. You can copy the code value from the receivers to the new remote to achieve the same control function;

About installation of remote control’s bracket:

1.Accessories include: bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pc.

2. There are 2 options for bracket installation:

1) Using screw and expansion tube make drilling installation (suitable for uneven and ash surface);

2) Using 3M foam sponge glue make free drilling installation (suitable for flat no ash surface).

Product information for placing order