RF Wireless Touching LED brightness dimmer controller

Technical parameters :

Controller

Input Voltage: DC12V,DC24V(optional)
Connection type: Common anode
Radio frequency: 433.92MHz
Receiver sensitivity: -105dbm
Radio receive way: ASK
Max STDBY current: 10mA
Max load: 6A(each circuit)
Control mode: PWM, 15 modes
Control way: touch the color ring ,you can change the brightness from the highest to the lowest (100%-1%,50 grades to adjust)
Static power consomption: 30LED/M : ≤5.4W 60LED/M: ≤10.8W
Static current: 30LED/M : 450mA 60LED/M: 900mA
Working temperature: -20~80 degrees
Material : Controll: aluminum remote: ABS+PC
Life span: 50,000h
Size: 66×64×24mm
Packing: 7715cm
G.W.: 0.15kgs/set Remote controller Technical Parameters(remote control) 1) Power supply: AAA battery * 3pcs 2) Cover material:ABS 3) Fabrication processing: multicolour printing & UV varnish

Functions of Keys 1 Key 1: on 2 Key 2: off 3 Key 3: highest brightness 4 Key 4: medium brightness 5 Key 5: lowest

Connection:

How to use it ?

1.Use your finger to touch the color ring ,you can change the brightness from the highest to the lowest (100%-1%,50 grades to adjust).

2.Resume fuction. The previous settings will be resumed while power on again.

3.Matching code Press Key 3once within 3 seconds when power on again,the light will blink 3 times if matching is successful. 4.Clearing Code,

Press Key 3 five times within 3 seconds when power on again,the light will blink 6 times if clearing is successful

Package included : 1 pcs * bightness ajustable led controller dimmer

1pcs * touch remote

1pcs * manual