Full Spectrum Spydr LED Grow Lighting Bar 

2176LEDs, Samsung 3500K 6000K OSRAM 660nm

A mimic to sunrise and sunset for seedling, Veg., flower, clones

Improve buds, nutrient contents, flavor taste, quality and yields

2.4g each watt on average per harvest  

To all the growers and distributors, 

How to make a wise selection of an ideal light for your plants?  

- Premium lights made by a sci-tech team, a skilled manufacturer and sophisticated testers

- Premium Lights with Technologic Features

Details As Follow

1. Front, Back, Side and Bottom View

8 passively cooled spydr grow lighting bars

Anodized, extruded aluminum alloy chassis with integrated heatsink for longevity

 2. Tech Specs 

3. Optical Performance

(1) Premium Full Spectrum

2176PCS Samsung & 88PCS OSRAM 660nm LEDs 

- CRI90 3500K, 6000K, OSRAM deep red 660nm, matching any plant type at any stage of growth, from veg. to bloom

- Scientifically engineered action full spectrum, designed for all phases, brings about more trichomes density, greater yields and potency. 

- Many more Samsung LEDs compared to other grow fixtures, ORIGLITE's 2176PCS, allows high PPFD, releasing maximum photosynthetic photon for plants.

- 88PCS OSRAM 660nm contributes to spotting beam every photon into desired coverage area, directing more energy to nourish lower flowers and leaves, offering unprecedented penetration, and resulting in more developed flowers deeper into your tent and higher end yields.

(2) Spectrum Distribution(I F = 65 mA, T s = 25 ºC)  vs Plants Growth 

 - The newly designed ORIGLITE Horticulture Lighting for signaling effects are white-based, and uses full spectrum to allow sufficient red light, while enabling a better working environment. It can also be a very powerful tool for ornamental plant growers who manipulate photoperiodic responses for scheduling. 

- ORIGLITE’s approach goes beyond the standard of horticulture lighting by providing the highest efficacy of 2.32 µmol/J at a current of 65 mA, a dramatically extended non-yellowing lifetime and better PPFD uniformity.

- ORIGLITE Horticulture LED has a full line-up of these with high efficient white, deep red (or far red) packages. You can apply ORIGLITE's Lighting virtually anywhere, such as in greenhouse and indoor farming, where dynamic growth lighting is needed.

(3) PPF & PAR Distribution & Footprint Coverage 

Footprint coverage, Veg. L6' W6', flowering L5' W5' in area. Sizes L1000 W1100mm

(4) Uniform Lighting 

This new item povides uniform and consistent lighting distribution, no dark area, no flickering. Edge to edge coverage eliminates leaf burn and hot spots.

Illuminance Uniformity > 0.836 for uniform growth of plants

(5) LitePro DLX Layout

 Simulation Plan

The spread of OSRAM 660nm deep red LEDs in the array guarantees a uniformly mixed spectrum on crops at short distance

4. Yields Output

The final yields depends on a lot on strains, grow skills and performance of the light itself. But you can expect to yield 2.4 grams on average per harvest. That's a good rule of thumb for this ORIGLITE's model.

5. Thermal Management & Energy Balance

(1) Science design of optical and electrical circuits, no exhausting rated electrical current of every LED

(2) Optical Aluminum Board: 2.0mm in thickness, heat transfer coefficient 1.5 W/(m•K)

(3) Natural Thermal Management: No fans, no noises, eliminating inferior features of traditional solution of airflow.

(4) Silicone Grease Composite: Evenly applied onto the back of the optical aluminum board for better perfomance of heat emission

(5) LEDs away from power supply, proctected from direct heating radiation. Surface Temperature, 57℃, emits max 1992.40 BTU of heat into growing space. Heating is not growers' big concern any more. Ideal for replacement of HPS. 

Energy : Heat = 60% : 40%

Low operating temp. decreases HVAC requirements by 40%

6. Electrical Performance(To view the following pic., test of Meanwell Power)

(1) Meanwell power, isolated, AC/DC power, operate from a univeral voltage 90-277VAC input for the global markets, 48VDC output for safe application. High efficiency up to 94%.

(2) The dual mode constant voltage and constant current output, protections of over load, over voltage and current, over temperature, short-circuit and surge. Built-in active PFC function. 

(3) Driver failure rate, 0.05% per 5000 hours. Safety standards, UL60950-1, BSMI CNS14336-1 approved.

7. Intelligent Control(for option)

Separate Spectrum Tuning & Integral Dimming

Allow digital tuning of spectrum to match any plant type at any growth stages, from Veg. to bloom, or to the Sun's circle. Dr. Tessa Pocock works to improve indoor plant production and associated energy as well as plant nutrient and pharmaceutical value.

(1) How to Make Spectral Tuning? 

For convenience of growers' use, the light designed for spectrum tuning by PWM(Manual operation). You can make tunning of 3 spectra, 3500K, 6000K, 660nm, at different stages of growth. 

- Turn on the light, 3 colors in the highest lumen output; can be dimming for less you require; 

- PWM knob functions as both spectral tuning separately and 3-colours integrated dimming; 

- Every time you press the knob once for tuning one color; 

- Turn it in a clockwise direction, each spectrum tuned from 0-100%; and vice versa, from 100-0%. No flicker, no dazzle; 

- The last day’s spectra you tuned kept in the memory chip of PWM. The next day turn on the light, no tuning again.

ORIGLITE uses electrodeless(non-section) encoded switch for dimming and spectrum tuning, super to a potentiometer, a device for dimming in sectional type(to watch the videos).

8. Burn-in Test, Spectroradiometric and Electric Test

(1) Burn-in Test

Performed on ORIGLITE's grow lights within the manufacturing facility, enabling the detection of any problems prior to the light  delivered to the growers, by operating it in the most rigorous, extreme or extended length of time and working conditions. In case of any component, modular, even the entire system is defective, it is most likely to be detected during the burn-in test.

ORIGLITE's burn-in test usually determines the maximum temperature, which the light can sustain.

(2) Spectrorodiometric and Electric Test 

To determine the spectroradiometric and colorimetric parameters, e.g. spectral power distribution, chromaticity coordinates, correlated color temperature, color rendering index, color tolerance, color difference, luminous flux, electrical current, voltage, wattage, power factor, etc..

The precise data much helps growers' precision cultivation or site specific crop management.

9. Simple Installation for Growers’ Convenience

Each lighting bar is updated with a push-lock. 3-minutes spent on installation, and convenient for cleaning.

10. Cases & Wide Applications 

Please pay a visit to https://www.facebook.com/origulm for Ram Seeds' breeding and flowering, Kevin's clones plants, Joshua's, Federic's, Erik's plants, Austin's new facility, Douglas' comments, etc.. 

11. Packaging

(1) Each bar wrapped with a PE bag, and inserted in Polyethylene foam;

(2) 2 pieces 5-layer sturdy corrugated CTNs for long-distance shipment and tough handling;

(3) Reliably sourced components: 8PCS bars, 1PC assembly bracket, 2PCS hanging steel cords, 1PC 1.5M D1 m2 electrical wire

ORIGLITE LED PLANT GROW LIGHTING MANUFACTURER

registered trademark, ORiGULM ®

https://origulm.en.alibaba.com

Please search 'origlite', 'origulm', 'spectrum tuning led', 'origlite quantum board',

for ORIGLITE LED GROW LIGHTS on alibaba, google, facebook, linkedin, youtube, twitter