Product Model:shadowless lamps

There are three different ways of shadowless lamps: shadowless lamp without any profile, shadowless lamp with aluminum profile and shadowless lamp with backlight.
Size can be customized;High light efficiency, uniform brightness, compared with traditional fluorescent lamps, energy saving 70%;Dimmable light, with DALI PWM DMX signal, widely used in shops, building decoration lighting, do backlight use.
1) shadowless lamp with shaped materialsSuper thin, only use about 10mm thick opal board and 5mm acrylic made, according to the specific length of the lamp can be placed on four sides or double long side.Edge tape.
2) shadowless lamp with aluminum profile, AF20 or EL30 can be used for easy installation and fixation.
3) shadowless lamp with backlight, do not use light guide, directly use backlight bar, the milky white diffuser hot bending forming, suitable for large size shadowless lamp. 

Physical parameters:
Thickness: 16-50 mm
Material: PMMA acrylic, aluminum profiles
Size: the best effect is within 1000mm of the customizable light guide distance. It is recommended to light the four sides with the light guide distance above 300mm. The thickness of the opal plate can be selected from 8-10mm, and the thickness of the light guide plate can be selected from 4-8mm.

LED:
Light bar brightness: 1400LM/M
Light bar color: 2800k-7500k, two-color temperature, RGB
Color rendering index: > 85
Light strip position: single long side, double long side, four side

Application scenarios:
Can be installed in the ceiling or fixed to the wall, can also be placed on the floor to do backlight.
Indoors, not waterproof
Warranty: 2 years