Share
1. Strict incoming material check
2. Efficient production
3. 8~24hours aging test
4. Safe storage
5. Strict inspection of finished goods
6. Considerate after-sale service, excellent recall policy
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Product Description
Name | |
Voltage | AC/DC 12V |
Luminous flux | 250-300lm |
Dimension | 49.5X58mm |
CRI | >80 |
LEDs | Epistar LEDs SMD5050 RGB 2pcs SMD3030 white 6pcs |
Reflect Your Mood
Personalize your lights with a color palette of over 16 million colors including warm white and cold white
Set schedules, timers, and countdowns and have your lights work around your life
Color Tempereture -warm white to cool white
adjust the smart bulb’s tune of the white temperature, from bright daylight to soft, relaxing white.
With or without zigbee hub works normally
Brightness from 1-100%
Dim brightness to customize lighting and suit your mood
Dynamic & Customs: 9 Pre-programmed color modes to kick start your party, and you can also create your own modes
2.4G RF & Zigbee Hub Control
All in one App
Connect with the zigbee hub and control your smart devices all in one Free App, let's free from a app-crowded phone sence.
Away-from-home control
With phone app, you can control the lamps wherever you want, to make the house more security.
Control with Your Voice
The Gledopto Bulb works with Amazon Alexa and Google Assistant to manage your devices through voice Control. Assign a name to each
Smart Bulb and communicate each bulb by name when making a voice command. You can also create a group for all your smart devices
and control them all in one command.
Smart Bulb and communicate each bulb by name when making a voice command. You can also create a group for all your smart devices
and control them all in one command.
On/off Wall Switch
Zigbee hub required.
To make all your normal bulb smart, and also like a smart plug to make your appliance small power (max 1200W) electronic devices
to a smart one, like fan and kettle, etc.
Timer function and indicator green light.
To make all your normal bulb smart, and also like a smart plug to make your appliance small power (max 1200W) electronic devices
to a smart one, like fan and kettle, etc.
Timer function and indicator green light.
9 Pre-programs
Mode 1: warm white 2: white light 3: cold white Mode 4: Red light 5: Green light 6:Blue light
Mode 7: RGB fade in fade out, speed adjustable
Mode 8: RGB flash, speed adjustable
Mode 9:Color breathing
Mode 7: RGB fade in fade out, speed adjustable
Mode 8: RGB flash, speed adjustable
Mode 9:Color breathing
RF Wall Dimmer
- Color wheel, brightness bar, cct bar
-4-group control, each group can control limitless lights
-9 pre-modes for your options, also s+ and s- to change the speed when color strob;
User Instruction
Connection with Gateway (Require zigbee hub)
1. Connect the LED lights.
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.
Link & Use the Remote Control (No need zigbee hub)
1. Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED light turns green, indicating successful code matching.
1. Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED light turns green, indicating successful code matching.
2. Long press the "off" button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay power off state.
4. Long press M key to enter automatic pre-modes.
3. Long press the small moon key to enter the 60 seconds delay power off state.
4. Long press M key to enter automatic pre-modes.
Related Products
Customer Reviews
Company Information
Q1. How to proceed an order for led light?
1. Let us know your requirements or application.
2. We quote according to your requirements or our suggestions.
3. Customer confirms the samples and places deposit for formal order.
4. We arrange the production.
Q2: Do you offer guarantee for the products?
Yes, we offer 2-3 years warranty to our products.
Q3: How to deal with the faulty?
Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Then, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Responsibility
Customer Reviews total 0 items