smd 3528 led strip led strip no need power supply high voltage black light uv strip led  

Specification

Advantages:

       220V high voltage led strip is an "updated version" of the low voltage strip.The use of DC 12V led strip has to be with a miniwatt adapter,and its best length is 5 meters.For the projects,this is very inconvenient. Now,our high voltage strip could solve all the problems.100 meters in one line without connection,and no signal amplifier needed. Cost-saving on power supply and installation,easy to transport and install.

Features:

1. Can be run in 220V or 110V without extra adaptor or power source.

2. Can be max run 100 meter and also be cut or connected in every 0.5meter.

3. PVC tube provides good waterproof and can be used both indoor & outdoor.

4. Solid-state for high vibration resistance and good flexibility for any shape.

5. Independent LED, one led broken will not affect next leds.

6. More energy-saving, power consumption: SMD 3528—3.5W/M,SMD 5050 7W/M

7. Packing: 50meters/reel or 100meter/reel .It is the better solution for inside, outside project with long distance installed

7. Packing: 50meters/reel or 100meter/reel .It is the better solution for inside, outside project with long distance installed

Our high voltage led strip:

Advantage of BET’s Flexible High Voltage SMD LED Strips VS with others.

 1.Chip:

All the chips BET adopt is from Taiwan Epistar brand with 18-20LM, ,with uniform light and low light decay with high quality and long life span, 

Two years Guarantee,CE&ROHS approved.

2. PVC

BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet, While most of the other normal strips only adopt muddy plastic material, 

this makes strips not so bright and will be easily turn yellow after short time using.

3.Technology:

The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted. 

This will be not so easy to fall off with the mounting when make installing.

4.Copper Wire:

BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light. 

While the common one only use the iron wire with low material cost and poor conduction.

5.PCB

The PCB width we adopt is with 8MM,While others is only with 5MM,wider PCB is better for heat dissipation and protect the LEDS.

6.Craft

BET adopt advanced machine and technology for every process, you can see our BET’s PCB inside is flat while other’s is curly.

 Application: