INSTALL THE DETECTOR BASE

1. Open area LPG detectors are intended for mounting on a ceiling or a wall in accordance with the fire standard in your country.

2. Attach mounting base to ceiling or wall. The base of the detector can be mounted directly onto an electrical junction box such as an octagonal (75mm, 90mm or 100mm), a round (75mm), or a square (100mm) box without using any type of mechanical adapter.

3. Position all wires flat against terminals, and fasten the wires on the terminals, See Figure 1.

4. Terminals functions description:
Terminal 6: DC24V POWER IN(Nonpolar)
Terminal 5: DC24V POWER IN(Nonpolar)
Terminal 2: Alarm out(Nonpolar)
Terminal 3: Alarm out(Nonpolar)

INSTALL THE DETECTOR HEAD

1. Align detector head alignment mark line with the base"s start alignment mark line as shown in Figure 2

2. Push the detector head into the base while turning it clockwise to secure it in place.

3. Do not install the detector head until the area is thoroughly cleaned of construction debris, dusts, etc.

4. After all detectors have been installed, apply power to the control panel.

5. Test the detector(s) as described in the TESTING section of this manual.

6. Notify the proper authorities that the system is in operation.

Zhongshan Guta Fire Equipment Tecnology Co., Ltd is a manufacturing and trading combo for fire system in Zhongshan, China with full experience in R&D and sales. We supply fire equipment with high quality and moderate price.

Our products lines are as follow:
1.Fire Alarm System
2.FM200 Gas Suppression System:
3.Fire Extinguisher
4.Emergency Light
5.Fire Hose Reel & Cabinet
6.Waterproof Box
7.Fire Telephone Control System
8.Fire Door
9.Valve
10.Ungrouped