Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
T-300K online led pixel controller,can be controlled via PC;suppor many kinds of IC;8ports*1024pixels=8192pixels
1.T-300k System features
32—256 grade Gray level,Support software Gamma correction.
Support the rules and special-shaped handle.
- 8 ports output,one port can support 512-1024 lamp pixels.
- On-line (also can SD Card) control, offline controlCan be multiple controllers used in combination, the contents of the line control program stored in the SD card.
- Compatible with single line or double line chips.
- If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M
Note: the T-300 K controller offline control, each machine controller must put a SD card.
2012 Edition T-300K controller can only be combined with the new version software LedEdit2012 . Using the old software does not support the new version of the controller, the new version of the controller has been printed the Chinese sign.
2.Support chips:
Support chips: | Software code& Controller type | Lamps/(MAX) | NOTE |
LPD6803,D705,1101,6909, 6912 | T-300K-6803 | 8192 | 32 grade gray level |
LPD8806,LPD8809 | T-300K-8806 | 4096/8192 |
|
TM1803,TM1804,TM1809,TM1812 | T-300K-TM | 4096/8192 | TM1804&TM1809 Divided into high speed and low speed |
TM1903,TM1904,TM1909,TM1912 | T-300K-TM19 | 4096/8192 |
|
UCS6909,UCS6912,UCS7009,UCS5903 | T-300K-UCS32 | 8192 |
|
UCS1903,UCS1909,UCS1912 | T-300K-UCS256 | 4096/8192 | Divided into high speed and low speed |
UCS3903 | T-300K-UCS1024 | 4096/8192 |
|
DMX512 | T-300K-DMX | 1360/4096 | Compatible with standard DMX512 |
WS2801,WS2803 | T-300K-WS | 4096/8192 |
|
WS2811 | T-300K-WS2811 | 4096/8192 | Divided into high speed and low speed |
DS189 | T-300K-DS189 | 4096/8192 |
|
TLS3001,TLS3002,TLS3008 | T-300K-TLS | 4096/8192 |
|
P9813 | T-300K-P9813 | 4096/8192 |
|
SM16715 | T-300K-SM16715 | 4096/8192 | Divided into high speed and low speed |
SM16716 | T-300K-SM16716 | 4096/8192 |
|
BS0901,BS0902 | T-300K-0901 | 4096/8192 |
|
BS0815 | T-300K-0815 | 4096/8192 |
|
NOTE:if chip is 256 grade gray level and Single-line IC choose .When programming choice high speed mode and one interface controls 1024 lamps the play speed can reach 30 frames/s. Double-line IC or single-line IC with low speed , one interface controls 512 lamps the play speed can reach 30 frames/s.
3.Appearance picture
4.The meaning of flag
TTL signal(245 signal):
AC IN | Exchange 220V power supply | COM(common port) | GND (ground wire) |
POWER | POWER LIGHT | DAT | Signal |
STATUS | Status light | CLK | The clock line |
SD CARD | SD card slot |
|
|
NOTE:According to TTL signal output, Ground of the controller must be connected to the lamp ground.
5.System architecture figure
Note:The IP address of the computer should be set to: 192.168.60.178
6. wiring diagram
Note:
- If the distance between controller and lamps more than 50m we suggest using differential signal transmission control or Photoelectric isolated signal transmission control,please read the manual carefully.Signal lines must be a cable,the best is Super five kinds of cable.
8. Specific parameters:
Memory card:
Type:SD card(if controlling so many lamps it is best to use the high-speed SD card.)
Capacity:128MB—2GB
Format:FAT
Store file:*.led
Customer Reviews total 0 items