Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
EMI Range For LED Light With Internal Driver
Emergency Pack For LED Tri-proof Tube
Type : Low Voltage Emergency Pack
Emergency Duration : 3 Hours
Emergency Brightness: 20%
Lights Power :60W
Matched program : Emergency Pack + 12V/4Ah Ni-CD Battery Pack
Emergency Pack For LED Ceiling Lamp
Type: Low Voltage Emergency Pack
Emergency Duration : 3 Hours
Emergency Brightness : 20%
Lights Power : 30W
Matched Program :Emergency Pack+7.2V/3Ah Ni-CD Battery Pack
Emergency Pack For LED Panel
Type : Combined driver emergency pack
Emergency Duration : 3 hours
Emergency Brightness : 20%
Lights Power: 36W
Matched Program : Combined driver emergency pack +12V/2.5Ah Ni-CD Battery Pack
High Voltage Emergency Pack Wiring Diagram
This high voltage wiring diagram is suitable for such as led tube,led bulb and other lighting has internal drivers lighting.
Low Voltage Emergency Pack Wiring Diagram
This Low voltage wiring diagram is suitable for such as led downlight,led panel,led ceiling lamp and other lighting has external drivers lighting,which just need 10-90% emergency brightness when mains power failure.
What is an emergency light fitting?
Emergency light fittings include a battery as a backup power source that is continuously charged. Emergency light fittings can tell when the power has failed and immediately switch to using the backup battery. The battery needs to power the light fitting for a minimum of 3 hours. To conserve power the light output from the fitting is reduced, often to 10% of the normal light output.
What is the difference between a maintained and non-maintained fitting?
Maintained fitting – will operate as a normal light fitting and be controlled with all the other lights in the area, however when the power fails the maintained emergency fitting will continue to operate but, at a lower light level.
Non-maintained fitting – is normally switched off, with its batteries being continuously charged and a green LED showing fully charged. When the power fails then the fitting switches on using its battery supply. Non-maintained fittings are not part of the general lighting but are fittings such as emergency exit signs.
Low Voltage Emergency Packs
Designed specifically to suit most constant current type LED,low voltage utilizing DC/DC switcher circuitry.Mainly applied to LED panel,LED downlight,LED strip and so on.
Specification
Input Voltage: 85-265V AC 50/60Hz
Em.Power Watts:Max 25W
EM.Duration: 1-3 Hours
Em.Ouput current: Constant current output
Em.Output Voltage:10-60V DC
Battery type: High Temperature ni-cd cells
Recharge time: 24 hours
Amblent Temp:0℃-55℃
Technical Details
Em.Power Watts : 5W-25W
Em.Duration : 3 Hours
Battery Voltage:6V-12V series
Battery Capacity Ah : 3Ah-8Ah
Charge Current :150mA-400mA
Cut-off Voltage: 5V-10V
High temp ni-cd battery
Special designed to fit the emergency lighting and other hgith temp power backup applications.
Customize battery backup systems for lamps 8-70W,emergency time 1-3 hours
Has a high trickle-charge efficiency even at temperature as high as 70℃
Warranty working properly within temp range -20℃∽70℃,operating life 4 years.
IEC 61951-1
Secondary cells and batteries containing alkaline or other non-acid electrolytes
Portable sealed rechargeable single cells
Part1: Nickel-cadmium
High temp ni-cd battery
Special designed to fit the emergency lighting and other hgith temp power backup applications.
Customize battery backup systems for lamps 8-70W,emergency time 1-3 hours
Has a high trickle-charge efficiency even at temperature as high as 70℃
Warranty working properly within temp range -20℃∽70℃,operating life 4 years.
IEC 61951-2
Secondary cells and batteries containing alkaline or other non-acid electrolytes
Portable sealed rechargeable single cells
Part2: Nickel-metal hydride
Emergency LED Bulb
The emergency led bulb is equipped with real time AI electronic devices for smart circuit checking,logical charging/discharging and precise electric shock protection.
It can ither uses as emergency lamp or simply behave as common bulb without special change of electric connection.
By replacing it to your existing light bulb,your present switch can turn on/off the lamp as before when the city electricity in function.
In case failure of city electricity,simply turn on the switch,the lamp will lit on by using the power of battery inside,running time around 4 hours.
This unique control system can plug and play to change your exiting light bulb into a professional lamp,with high eco performance ,good cost effective result.
Specification
Input Votage : 85-265V AC 50/60Hz
Power Watts : 3W/5W/7W/9W
Outpur Current :Constant current output
Output Voltage : DC 5V
Power Factor: 0.7
Color Temperature: 2700-6500K
Em.Duration: 4-6 Hours
Battery Type:18650 li-ion battery
Recharge time: 24 hours
Amblent temp: 0℃-55℃
Technical Details
LED bulb: 3W 5W 7W 9W
Dimension: 3W (Ф60mm)5W(Ф60mm)7W (Ф80mm)9W (Ф80mm)
Luminous flux: 3W(270LM) 5W(450LM)7W(630LM) 9W(800LM)
E.m power watts : 1.5W
E.m Duration : 4 Hours
Battery Voltage :3.7V
Battery capacity Ah : 2000mAh
EVEN TECHNOLOGY CO.,LTD (EMERGENCY LIGHTING KITS)
ABOUT US
Even Technology is the only professional manufacture who produces emergency accessaries for lighting.As you know,high quality makes from specialty.
Our products major in:
- Emergency Kit for Lighting
- Rechargeable Battery (NiCd, NiMH,Li-ion and its packs)
- Emergency Luminaries Products
Our factories are set inside mainland China, in order to provide low manufacturing cost for you to win more market.
Why Choosing Us
LED lighting plays a key important role in daily life，accordingly,the emergency kit is also important within this products.
Emergency Lighting Inverters need professional understanding of battery specification to get good performance. We develop our inverters inch by inch to best fit lights and battery.
Therefore, rather than its price, the reliability is the top factor to consider.
More experiences we have,more professional will service for you.
You are most welcome to contact us by Skype, e-mail, telephone call or even walk in to talk to us. We will try best to get best solution for you.
Customer Reviews total 0 items