Tunable white CCT  2.4G RF 4 zones wireless wall panel remote control for led controller and led dimming driver 

2.Features:

1)Isolated driver

2) Adopting advanced PWM technology

3) Higher efficiency, high PF, non-flicker

4) Short-circuit protection, overvoltage protection

5) High-quality delicate & soft dimming effect(4096 level)

6) Memory function

7) 2.4GHz wireless remote control, Air Self-inspection Sync control

8) Compatible with Freelighting APP control system, achieve WIFI intelligent control by your mobile phone.

9) Designed for constant current CW+WW LED Light Fixtures: like LED panel, LED ceiling lamps, LED down light etc.

10) Widely used for intelligent household/commercial indoor lighting, like mall, hotel, office indoor lighting design.

11) Certificate: CE/EMC/RED/RoHS

12) 3 years warranty

3. Technical Parameters

4. Case temperature TC and driver life curve

5. Main-product code and Parameters

Wire specifications recommend:

Input wire:three-core PVC plastic wire H05VV-F ,diameter =0.72mm,VDE certificate,core 3*1.0mm2. 300/500V,Stripping 11mm and tin dipping 3mm for the end of wire which is directly connect with the driver.

Output wire:three-core PVC plastic wire,diameter =0.5mm. Stripping 11mm and tin dipping 3mm for the end of wire which is directly connect with the driver.

7. Product compatibility(Remote control optional)

Typical Applications

1)Compatible with a variety of models remote control, any combination is okay according to the project requirement.

2)Air Self-inspection Sync technology make it has more excellent wireless synchronization function rather than other similar products. Especially, more led drivers(No limited) can be wireless-connected and sync controlled by one remote control, No longer be limited by remote control distance.

(3)Typical applications for 4 zones remote control, more drivers can be sync controlled in each zone, 4 zones can be controlled both separately and overall.

9. Tips:

1)If the lamp turned off by remote control, it also can restart the lamp directly by the AC power switch(No-flicker driver need to restart after turn off the power switch and discharge for 5s.

2)If the lamp is light up without any operation in 167 hours, the driver will turn off the lamp automatically. It will recount the time if there is any operation from power switch or remote control.

3)Each driver can save unique RF codes(for remote control) and unique wifi code(for wifi control). You can copy the RF code between remotes when more than one remote are needed. Please get the operation instruction from the remotes specification.

4)Memory function, each time power-on reserve the mode which stop in the last power-down.