Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
UCS512 DC5V F8 RGB LED Pixel Module Light Lamp Strip 12mm Injection IP68 Waterproof
The pixels are connected by a 4-conductor cable. +5V (Red), Ground (Blue), Data (Yellow) and Clock (Green). Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end. Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller.
The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED. (Please note: mcd ratings of LEDs are notoriously inflated by most LED sellers, so be extra-skeptical when reviewing LED ratings!)
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs
The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED
12mm diameter (0.45") 75mm deep (1.5")
100mm
50 pieces per strand
These pixels use a dmx512 chip for full 24 bit color
5V power, 60mA maximum per pixel (LED on full white)
2-pin SPI-like protocol
dmx512 Datasheet for the chip inside each pixel
Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)
UCS512 DC5V F8 RGB LED Pixel Module Light Lamp Strip 12mm Injection IP68 Waterproof
UCS512 DC5V F8 RGB LED Pixel Module Light Lamp Strip 12mm Injection IP66 Waterproof
UCS512 DC5V F8 RGB LED Pixel Module Light Lamp Strip 12mm Injection IP66 Waterproof
1.Payment : T/T or West Union,L/C and PayPal
2.Sample lead time: 1-3days (Custom products (4-7days)
3.Production lead time: 3 - 5 days(According to products quantity ,Custom products about (5 - 7 days)
4.Shipping freight is delivered under your requests
5.Shipping port : Shenzhen ,Mainland China
6.Discounts are offered based on order quantities
7.Quality after sales service
8.Logo: According to your requirement
9.Shipping: By Express(EMS,DHL,UPS,ARAMEX), By Air or By Sea
Anna R.
WhatsApp: +86 13638044243
Skype: +86 13638044243
Wechat: renxiaoduan
E-mail: sales02 @scottled.com
Customer Reviews total 0 items