UL listed dimmable led puck light

DGL-CB12W

LED ACCENT KIT

120V LED Puck lights

Easy to install

cool to touch

energy saving

Long life

Lens cover is UV filter

3 LED pucks accent kit

Surface or recess mount

Warm white, 4W each puck

Linkable dimmable

50% brighter than halogen or xenon pucks

Warning & Cautions

Review important safety instructions before installation

Risk of exposure to excessive ultraviolet UV radiation

Do not operate without complete bulb enclosure in place or if lens is damaged

Prior to installation, plug your cabinet light into an available electrical outlet in order to ensure that one of more of the bulbs have not vibrated loose during shipping.

Important Safety Instructions

This light is equipped a polarized attachment plug (a plug having one blade wider than the other).

This plug will fit in a polarized outlet only one way. This is a safety feature if you are unable to insert the plug fully into the outlet, reverse the plug. If it still will not fit contact a qualified electrician.

Never use with an extension cord unless the plug can be fully inserted. Do not attempt to alter the safety purpose of the polarized plug.

Caution

To prevent electrical shock do not use this (polarized) unless the blades can be fully inserted plug with an extension cord receptacle or other outlet, unless the blades can be fully inserted.

Under cabinet only-minimum spacing 12” on centre

Lighted lamp is hot.

Bulb replacement

Use SMD LED CHIPS

12W 120V

To remove lens cover

Turn counter clockwise

Use a soft cloth when handling the bulb

To replace lens cover turn clockwise until cover is secured

Warning

To reduce the risk of fire, electric shock, exposure to excessive UV radiation or injury to persons

Turn off/unplug and allow to cool before replacing bulb

Bulb gets hot quickly! Contact only switch/plug when turning on

Do not touch hot lens, guard or enclosure

Do not remain near light if skin feels warm

Do not lock directly at lighted bulb

Keep lamp away from materials that may burn

Use only with a SMD3528 led chip

Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb

Do not operate the lamp with a missing or damages lens; lens acts as guard/shield and UL light filter

This lamp is intended to be used as an under cabinet light

Avoid contact with the cord or combustibles such as plastic, paper goods, etc. With the hot bulb, bulb holder or reflector

During installation, position cabinet light with respect to the cabinet-walls, so as to permit reading for the lamp replacement marking

This cabinet light is not intended for illumination of aquariums

This cabinet light is not intended for installation in plastic cabinets

The instruction provided on the enclosed adhesive back should be attached to cabinet

injury to persons and damage to the lamp and/or mounting surface may result if the lamp is pulled from the surface.

To reduce the likelihood of such injury or damage, mount only on a wood or particle surface that is mechanically sound.

During installation, route and secure cord so as to avoid the likelihood of the cord contacting the cabinet light.

When replacing the bulb, lens cover is to be turned and removed, then follow bulb insertion and replacement directions for removing bulb.

Use only insulation staples or plastic ties to secure cord.

Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.

Not intended for recessed installation in ceiling.

Preparation

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product.

Estimated assembly time 30 minutes

Tools required for assembly (not included)

Flathead screwdriver

Star-head Screwdriver

Drill

1/16” Drill bit

Hammer