Features

1. Using high-quality LED light source, the lighting is soft and comfortable.
2. The human body sensor switch, the human body enters the working range of the product to automatically sense the light, and the human body automatically goes out after a delay of 18S.
3. Easy to install, no need to screw, can be directly attached to the magnet to absorb.
4. Three working modes are available for free selection.

0.4W±10% 17LEDs Cabinet light

❈  Power: 0.4W±10%

❈  LED Quality: 17LEDs

❈  Length: 12cm(4.72inch)

❈  Shell Color: Red/Black/Silver/Golden 
❈  Lithium battery: 300MA
❈  Working current: 100MA
❈  Luminous flux: 35LM
❈  Indicates: >80
❈  Delay time: 18S>(±2S)
❈  Sensing distance: >3M
❈  Induction angle: 120 °
❈  Operating temperature: ~20 ° C ~ 50 ° C

1.2W±10% 39LEDs Cabinet light

❈ Power: 1.2W±10%
❈ LED Quality: 39LEDs

❈ Length: 23.5cm(9.25inch)

❈ Shell Color: Red/Black/Silver/Golden 
❈ Lithium battery: 900MA
❈ Working current: 340MA
❈ Luminous flux: 90LM
❈ Indicates: >80
❈ Delay time: 18S>(±2S)
❈ Sensing distance: >3M
❈ Induction angle: 120 °
❈ Operating temperature: ~20 ° C ~ 50 ° C

3W±10% 71LEDs Cabinet light

❈ Power: 3W±10%
❈ LED Quality: 71LEDs

❈ Length: 40.5cm(15.95inch)

❈ Shell Color: Red/Black/Silver/Golden 
❈ Lithium battery: 1500MA
❈ Working current: 750MA
❈ Luminous flux: 170LM
❈ Indicates: >80
❈ Delay time: 18S>(±2S)
❈ Sensing distance: >3M
❈ Induction angle: 120 °
❈ Operating temperature: ~20 ° C ~ 50 ° C

3.2W±10% 109LEDs Cabinet light

❈ Power: 3.2W±10%
❈ LED Quality: 109LEDs

❈ Length: 60.5cm(23.8inch)

❈ Shell Color: Red/Black/Silver/Golden 
❈ Lithium battery: 2200MA
❈ Working current: 800MA
❈ Luminous flux: 220LM
❈ Indicates: >80
❈ Delay time: 18S>(±2S)
❈ Sensing distance: >3M
❈ Induction angle: 120 °
❈ Operating temperature: ~20 ° C ~ 50 ° C

Instructions for use

1. Use the double-sided tape to install the iron piece and the built-in magnet of the lamp to absorb, then smear the piece of iron 3M glue to paste the lamp.You can install it.
2. When the switch gear is turned to "ON", the lamp will be on.
3. When the switch gear position is set to the "AUTO" gear position, the lamp enters the automatic induction mode, that is, the person lights up and the person walks. The light is off after 18 seconds.
4. When the switch gear is turned to the "OFF" position, the lamp will go out.
5. Light-controlled induction: In the AUTO mode, the light control works automatically. When the ambient brightness is sufficient, even if the person is active, it does not light.

Attention

1. The product is not waterproof, please do not use it in rain or wet environment.
2. Do not install the product in strong light or hot and cold air inlet and outlet, so as not to affect the sensitivity and cause wrong actions.
3. When the light is dim and flashing, please charge the product in time.
4. When the product fails during the warranty period, please do not open the product without permission, otherwise it will not be guaranteed.

Q1. Can I have a sample order for led light?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2-5 years warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.