Underwater LED Fishing Light Green light 3000W submersible luring lights attracting fish lamp for boat fishing

Product description:

Installation and maintenance

1. Firstly, arrange the various matching parts and accessories for LED fish lamp

2. The power must be cut off before installation

3. Install the matching leakage switch

4. Connect the cable, the ground wire should be grounded, and the aviation female connector and the aviation male connector of the lamp should be screwed tightly.

5. Put the fish lamp under the water, do not sink to the bottom of the water, and turn on the light.

6. The lamp need to be hoisted with another cables and cannot be directly hoisted with electric cables.

The use of precautions

1. Please do not use rough objects to wipe the product, as it will cause damage to the outer casing.

2. After the lamp reaches the service life, please carefully recycle the product. Recycling advice can also be sought with local authorities or retailers.

3. This lamp needs to be installed and maintained by professionals, using the leakage protection switch. Grounding is required, and the cable at one end of the lamp should be protected with a waterproof rubber sleeve.

Please contact the supplier for product information, such as warranty, use environment and other precautions. Subject to change without prior notice.

Common faults and troubleshooting methods

  If the lamp is not lit, please check if the power is on and the switch is in the on position;

   If the lamp is off when it is on, please check if the power supply is in poor contact or loose.

 Note: If the lamp cannot be operated normally through the above methods, please contact the professional maintenance personnel of the lamp for maintenance.

If you have any questions about this description, please consult the engineer who holds the qualification certificate!

Packing details

1XLED fish lamp body, 1XCable line, 1XLeakage switch, 1XInstruction manual