| TECHNICAL SPECIFICATIONS |
| | | | | | | | | | | | | | | | | | | | |
| Item | : | USA Smart Plug |
| Model No. | : | ASP35000116 |
| Mains voltage | : | 130VAC 60Hz |
| Load | : | Max 3500W |
| Operation Frequency | : | 2.4 GHz - 2.483 GHz |
| Range (Typical) | : | 100-200m |
| Operation temperature | : | Ta: -20°C ~ +50°C |
| Case temperature (Max.) | : | Tc: +80°C |
| Storage temperature | : | -10°C ~ 60°C |
| Max. relative humidity | : | 20 ~ 90% |
| IP rating | : | IP20 |
| Insulation | : | Class I |
| Security mechanism | : | WEP / WPA-PSK / WPA2-PSK |
| Security type | : | WEP64 / WEPI 28 / TKIP / CCMP(AES) |
| EMC standard (EMC) | : | EN62311, EN61000 |
| Safety standard (LVD) | : | IEC/EN 60950, AS/NZS 60950 |
| Radio Equipment (RED) | : | EN300328, EN301489 |
| | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | |
| KEY FEATURES |
| | | | | | | | | | | | | | | | | | | | |
| >Work with Amazon Alexa/ Echo Dot& Google home& IFTTT. |
| >Manage your devices via your mobile phone or Voice Control. |
| >Intelligent Schedule - Smart Plug could create multiple schedules to turn on/off your electronic sets. |
| >Energy Monitoring - Statistical power consumption. |
| >Reset - Press the on/off button for more than 5 seconds until the Wi-Fi indicator starts to ash quickly. Wi-Fi Smart Plug is now ready for synchronization. |
| |
| INSTALLATION |
| | | | | | | | | | | | | | | | | | | | |
| Warnings: |
| 1. Installation must be carried out by a qualified engineer in accordance with local regulations. |
| 2. Disconnect power supply before installing. |
| 3. Ensure environmental conditions are suitable for electronic equipment. |
| |
| THINGS TO KNOW BEFORE USING WI-Fl SMART PLUG |
| | | | | | | | | | | | | | | | | | | | |
| Make sure your router is con gured to 2.4G,and your Smartphone is connected to this 2.4G network |
| Make sure the electronic device shown on your iOS/Android "smart life" APP is the one plug ged into the Wi-Fi Smart Plug. |
| Make sure you have a strong Wi-Fi signal at the Wi-Fi Smart Plug. |
| Make sure there are not too many devices connected to your router at the same time. You may temporarily turn off some other devices connected to the router and turn them back on again after the con guration is complete. |
| The number of Wi-Fi products that can be connected to the router depends on the performance of the router. |
| Make sure the "AP isolation/Access point" function is deactivated on your router. |
| Make sure no extra log in page is enquired in the browser after your device is connected to Wi-Fi |
| The Wi-Fi Smart Plug only works with a Wi-Fi network when rst installation. |
| Wi-Fi Smart Plug needs to be set up again if the SSID or password is changed. |
| No need to set up the Wi-Fi Smart Plug again when you turn it off or unplug it from one socket and plug it into another socket. |
| Hard Reset: Press ON/OFF button for 5 seconds and release it.The Wi-Fi indicator light will ash quickly.Wi-Fi Smart Plug is now ready for synchronization. |
Share
Customer Reviews total 0 items