Product Application

The push buttton series are used in controlling circuit of AC voltage up to 660V/AC 50Hz or 60Hz.rated voltage below 415V and DC voltage below 250V.Which are applied to CNC machine,machinery,power sector,telecommunicqations,shipping metallurgy and chemical engineering,etc.It is used for controlling the circuit of elecromagnetic starter,contactor,relay and so on.The pushbutttons with indicator are applied to place where signal indicators are needed as well.The main body of the push button is alloy and plastic.

The signal lamp serial are suitable for electrical appliances circuit of AC voltage up to 380V/50Hz(60Hz),and the rated DC voltage below 380V,It is used as indicating signals,warning signals and emergency signals,etc.The product confirms to the standards of GB/T14048.1,GB/T14048.5 and IEC60947-5-1. 

Contactor Characteristics

1) Rated operating characteristics:AC-15:A600 or Ue=240v and le=3A
                                                             DC-13:Q~600 or Ue=250V and le=0.27A conforming to ice 947-5-1
2) Rated geopolitical voltage:Ui=600V,pollution degree 3 according to IEC60947-1,Ui-600V
3) Rated impact resistance voltage:Uimp=6kV in accordance with IEC 60947-1
4) Contactor actions:slow break(NC or NO)
5) Reliable operation:salety device(emergency stop mushroom button):NC should be separated
6)Operation pressure:flash and convex button-NO with 1 NC with 1,auxiliary contactor-NO NC
7)Wiring section:single ship wire:0.75mm2-2.5mm2,strand wire:0.5mm2-1.5mm2

Factory

Our Factory

Team

Our Team

Our Workshop

Our Workshop

Warehouse

Our Warehouse