Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
2020 factory whol High Power Lightweight Sports Field 1800W LED Stadium Flood Lights Fixture for Large Area Stadium LED Lighting
Product parameter
| Module | LSDHM-1800W-LV(XXK) | Watt | 1800W |
| Adjustable | Modules 360° rotatable | Beam Angle | 10 / 20 / 60 / 90 degree/ 10 degree(P50-P8)/ 135*60 degree(P50)/97*47 degree(TypeIV) |
| Lumen | 270,000(150Lm/W) | Lifespan | 50,000 hours |
| CCT | 3000K 4000K 5000K 5700K | CRI | >70 (Optional with CRI>90) |
| Replacement | 3500-4000W HPS MH | Certification | ETL DLC ENEC TUV CE RoHS SAA CB IECEE Lm79 Lm80 ISTMT IK08 Salt spray test |
Size
Product Features
1. Lightweight.
The advantage of aluminum fin heat dissipation is that the weight is reduced by about 30% to 40%.This is an advantage compared to traditional die-cast aluminum lamps for sports field lighting installations. To reduce the loading weight of the pole and to reduce the workload of the installer.
2. Module Rotatable.
1.Rotating scale on the luminaire for customers to adjust the angle more accurately.
2.Module rotatable up & down & back and front up to 360 degree.
3.High heat dissipation
Our LED Stadium floodlights have a very good cooling system using a combination of highly thermally conductive materials. In fact, if the heat around the LED chip is too high, the brightness and life of the lamp will be reduced. Therefore, we also attach great importance to heat dissipation during design, which is one of the reasons for the durability of our lamps.
4.Waterproof and lightning proof design
The IP66 waterproof and lightning protection design makes the LED football field floodlights resistant to harsh conditions.
Product accessory
1.Standard lens plus tempered glass
2. Standard with 316 stainless steel bracket, strong hardness, never corroded.
3. Each module angle can be rotated freely
4. Finned radiator, the main lightweight design, reducing the load bearing pressure of the pole.
5. All power and module wiring are fast male and female connectors for easy follow-up maintenance
6. Standard with Meanwell Power + SMD 5050 lamp beads
7. Customers can choose the higher configuration of Meanwell HLG power supply
1. 316 stainless steel is an austenitic stainless steel. Due to the addition of Mo element, it has a great improvement in corrosion resistance and high temperature strength. It can withstand high temperatures up to 1200-1300 degrees and can be used under harsh conditions.
2.Install our High Power LED Football pitch lights Can withstand hurricanes of 51.0-56.0m/s.
1800W LED Stadium Light Beam angle
10 / 20 / 60 / 90 degree/ 10 degree(P50-P8)/ 135*60 degree(P50)/97*47 degree(TypeIV)
The installation height of the luminaire is usually between 30 and 50 meters, so the traditional floodlighting will have too much light loss. And our LED stadium flood light uses high quality Lumiled 5050 chips and lenses to select the desired illumination angle. The direction of the beam is concentrated to achieve precise illumination of the light and reduce light loss.
Most manufacturers design the lighting fixtures implementing lens and reflector technologies for desired light distribution.These existing LED lighting methods according to the characteristics of the light will spread to a wider area and will also fall on the area that does not need the light and may lead to light pollution which is inefficient in terms of energy savings. Dragonfly LED Football filed light technology prevents light pollution and emits the light only to the target area, This is advanced technology to control luminance with low power consumption to providea simillar level of luminous flux and also to maximize energy savings.
1800W LED Stadium Light Packaging
128*125*25cm 1pc/ctn
GW: 46kg
Application
Ideal for outdoor large venue lighting, stadiums, sports fields, tunnels, tennis courts, football fields, rugby fields, basketball courts, golf courses, marinas, etc.
Free Dialux simulation
Our engineers can customize professional DIAlux simulation for your venue for free.You only need to provide relevant site information, and our engineers will choose the best combination of power and beam angle for the LED lights.
Click here to contact us>>
Other product
About us
Exhibition
contact us
FAQ
Q Can I have a sample order for led light?
A Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q What about the lead time?
A Sample needs 3-5 days, mass production time needs 10~15 days for order quantity more than.
Q How do you ship the goods and how long does it take to arrive?
A We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q How to proceed an order for led light?
A 1.let us know your requirements or application.
2.We quote according to your requirements or our suggestions.
3.customer confirms the samples and places deposit for formal order.
4.We arrange the production.
Q Is it OK to print my logo on led light product?
A Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Here is our website: https://www.lampshining.com
Kindly free to contact us for more information up to 30% Discount can be given.
Customer Reviews total 0 items