Model | DR-15-5 | DR15-12 | DR-15-15 | DR-15-24 |
OUTPUT | DC Voltage | 5V | 12V | 15V | 24V |
Rated Current | 2.4A | 1.25A | 1A | 0.63A |
Current Range | 0-2.4A | 0-1.25A | 0-1A | 0-0.63A |
Rated Power | 12W | 15W | 15W | 15.2W |
Ripple & Noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p |
Voltage Adj. Range | -5%,+10% | ±10% | ±10% | ±10% |
Voltage Tolerance | ±2% | ±1% | ±1% | ±1% |
LINE REGULATION | ±1% | ±1% | ±1% | ±1% |
LOAD REGULATION | ±1% | ±1% | ±1% | ±1% |
Setup, Rise, Hold Up Time | 1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load 70ms/230VAC |
HOLD UP TIME (Typ.) | 16ms/115VAC at full load |
INPUT | Voltage Range | 85 ~ 264VAC 120 ~ 370VDC |
FREQUENCY RANGE | 47 ~ 63Hz |
AC Current | 0.88A/115VAC 0.48A/230VAC |
Efficiency | 77% | 84% | 83.50% | 85% |
Inrush Current | COLD START 35A/115VAC 65A/230VAC |
PROTECTION | Over Load | 105%~160% rated output power |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
Over Voltage | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V |
Protection type : Shut off o/p voltage, clamping by zener diode |
ENVIRONMENT | Working Temp. | -20℃~+60℃(Refer to "Derating Curve") |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
Storage Temp., Humidity | -40 ~ +85 , 10 ~ 95% RH |
Temp. Coefficient | ±0.03%/℃(0~50℃) |
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
SAFETY & EMC | Withstand Voltage | I/P-O/P: 3KVAC |
Isolation Resistance | I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH |
EMC EMISSION | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 |
EMC IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A |
OTHERS | MTBF | 1172.3K hrs min. MIL-HDBK-217F (25 ℃) |
DIMENSION | 25*93*56mm (W*H*D) |
Customer Reviews total 0 items