We have been certified by CE, CB, CCC and ENEC.
Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
Product Overview
Xitanium LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the best out of the LEDs, these light sources require highly reliable and ePcient LED Drivers. The new Philips Xitanium Fixed Output and Dimmable (1-10V) LED Outdoor Drivers are specifically designed to deliver reliable performance and protection while meeting the strict performance, approbation and application requirements.
Benefits.
• Ultimate robustness and reliability secure the lowest luminaires maintenance overtime
• Long lifetime and high survival rate thanks to superior thermal management
• Consistent waterproof performance throughout the lifecycle
• Easy to design-in, based on extra EMI margin for independent use
• Compliance with IEC and UL standards, suitable for various markets
• Backed by 5 year warranty from a company you can trust
Features.
• Proven robustness and reliable electronics driver design
• Achieving highest efficiencies based on advanced technology
• Extremely long lifetime, fitting with harsh outdoor applications
• Suitable for Class I isolated luminaires
• Authorized certificates: UL / CSA/ CE / CCC / ENEC/ CB
Application.
• Road and street lighting
• Area and flood lighting
• Tunnel lighting
• High-bay lighting
Electrical Input data
Specification item | Value | Unit | Condition |
Rated input voltage range | 120...277 | Vac | |
Rated input voltage | 230 | Vac | |
Rated input frequency range | 47...63 | Hz | Performance range |
Rated input current | 0.29-0.69 | A | @ 230 Vac input full load |
Max. input current | 1.5 | A | @ minimum input voltage AC |
Rated input power | 170 | W | @ full load |
Power | 85 | @ full load | |
Total harmonic distortion | ≤ 10 | % | @ full load |
EPciency | > 91 | % | @ 220 Vac input full load |
Input voltage AC range | 99...305 | Vac | Performance range |
Isolation input to output | Basic |
Electrical Output data
Specification item | Value | Unit | Condition |
Regulation method | Constant Current | ||
Output voltage | 71...143 | Vdc | |
Output voltage max. | 300 | V | Peak voltage at open load |
Output current | 0.53 | A | Full output current setting |
Output current min dimming | 70 | mA | |
Output current tolerance | ± 5 | % | |
Output current ripple LF | ≤ 5 | % | Ripple = peak/average < 1KHZ |
Output current ripple HF | ≤ 15 | % | |
Output power | 75 | W | Full output |
Electrical Data Control Input
Specification item | Value | Unit | Condition |
Control method | 1-10V | Output current amplitude dimming | |
Dimming range | 10...100 | % | Default range |
Galvanic Isolation | Basic |
Operational Temperature and Humidity
Specification item | Value | Unit | Condition |
Ambient temperature | -40...+55 | oC | Higher ambient temperature allowed as long as |
Tcase-max is not exceeded. | -30 | oC | Min. steady-state Tcase |
Tcase-max | 85 | oC | Maximum temperature measured at Tcase-point |
Tcase-cut ou | 88 | oC | Power to LEDs is reduced |
Maximum housing temperature | 90 | oC | In case of a failure |
Lifetime
Specification item | Value | Unit | Condition |
Driver lifetime | 50,000 | hours | Measured temperature at Tcase-point is Tcase-max. Maximum failures = 10% |
Programmable Features
Specification item | Value | Remark | Condition |
Set output current (AOC) | No | See Design-in guide. | Default output current: = 700 mA |
Features
Specification item | Value | Remark | Condition |
Open load protection | Yes | Automatic recovering | |
Short circuit protection | Yes | Automatic recovering | |
Over power protection | Yes | Automatic recovering | |
Hot wiring | No | ||
Suitable for fixtures with protection class | I | per IEC60598 | |
Over temperature protection driver | Yes | Automatic recovering |
Dimensions
Specification item | Value | Unit | Condition |
Length (A1) | 138 | mm | |
Width (B1) | 59 | mm | |
Height (C) | 38 | mm | |
Weight | 700 | gram |
Packaging | ||
Size | 26*21.5*13.5cm | |
Weight | 12kg | |
Packaging Details | Led Drivers and modules: Philips original carton packing with MOQ.( 12pcs in one carton.) Led Light: Philips original carton packing(usually 1pcs in one carton) Customize shipping packing (eg Composite wooden pallet, cardboard pallets and composite wooden cases package) are available at additional cost. |
Certifications please see attached photoes.
Q1. Are you Philips Authorized agents?
A:Yes, we can offer Philips Authorized Certificate.
Q2: What's your main products?
Led Drivers and modules. Road Light, Street Light and Highbay Lights.
We still can offer one step lighting Solution, depending on good cooperation relation with China(mainland) Lighting Manufacturers.
Q3. How about the delivery time ?
LED driver and modules Sample: 5-7days
LED driver and mudules Bulk Order: need recheck with us, usually 30-40 days.
LED Lights(sample& Bulk Order): need recheck with us, usually 30-40 days.
Q4. What is the Transaction terms ?
A: Samples: Cash before shipping.
B: Bulk Order: 50% in advance(deposit), 50% of the balance should be paid before shipping.
Q5. How is the Logistics and Transportation time ?
A Samples: International Express Service- DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
B.Bulk order : Airline and Sea shipping are available. Transportation time: need recheck with logistic company.
Q6. Do you have a minimum order?
Bulk order: Philips Original MOQ Packing(usually, 10pcs -12pcs in one carton).
Q7: How Long is the Quality assurance Time?
Philips Official Quality Assurance Time(Usually, 3-5years depend on products.)
Mob:+86 18917790116
skype:+86 13818515084
whatsapp:+86 13818515084
Web: www.bp-light.com
Customer Reviews total 0 items