ZIGBEE bridge Led Controller RGB/RGBW/RGB+CCT DC12/24V Zigbee LED controller ZLL controller compatible with HUE Lightfy Echo

  • Unit Price: Negotiable
  • Brand:

  • Origin:

    China

  • Categories:Lights & Lighting
  • Validity Period:

    Long Term

  • Published on:

    2020-12-17 10:49

Other Products
12V 5V 24V 36V 8A PWM Wireless RF LED Dimmer CV receiver V1 with 2.4G Remote Single Color LED Strip Light Dimmer
¥Negotiable 8Views

12V 5V 24V 36V 8A PWM Wirele

Recommend  
AC Triac RF Dimmer &Push Dimmer+1 Zone RF 2.4G LED Dimming Remote+Rotary Panel AC Triac RF Dimmer
¥Negotiable 9Views

AC Triac RF Dimmer &Push Dim

Recommend  
bridge LED RGBW 5W GU10 spotlight color changing zigbee zll LED bulb AC100-240V led APP controller dimmable smart LED
¥Negotiable 6Views

bridge LED RGBW 5W GU10 spot

Recommend  
dali dimmable track lighting push dim controller constant voltage 1channel DC12V 24V dimmer
¥Negotiable 9Views

dali dimmable track lighting

Recommend  
2200K-6500K Customized led stripe 24v extra warm white neon flex light
¥Negotiable 12Views

2200K-6500K Customized led s

Recommend  
You may like
  • Product Description
  • Company Overview

Product Information

Brand:

none

Address:

China

Min.Order:

none

Supply:

none

Valid until:

Long Term

Product Details

                ZIGBEE bridge Led Controller RGB/RGBW/RGB+CCT DC12/24V Zigbee LED controller ZLL controller compatible with HUE Lightfy Echo

 
In this manual we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices works with many ZigBee Light Link Gateways* like Philips Hue, OsramLightify**
or IKEA Tradfri***.
Wire Connection:
1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable
cross-section must be between 0,33 and 2,08mm²(AWG22-14).
2. Now push down the terminal with a screwdriver and put in the cable, see picture P2.
3. Take the screwdriver away and the cable is connected with the terminal.
On picture P3-P7 you can see examples for the connection of different LED controllers:
- P3 for RGBW/RGBWW products
- P4 for RGB products, use a RGBW controller and don’t connect the wire W
- P5 for single color LED product, use a RGBW controller and don’t connect the wire
R, G, B
- P6 for RGB+CCT(warmwhite+coldwhite) products
- P7 for CCT(warmwhite+coldwhite) products
Connection with Gateway:
1. Connect the LED product to the controller see section “wire connection”.
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on
after blinking 4 times.
*For RGBW/RGBWW devices you will find two SSIDs. One for white/warmwhite, the other
for RGB.
**The Osram Gateway supports only one SSID, with the RGBW/RGBWW device it find onlyRGB.
***IKEA Gateway will support RGB devices till the end of the year 2017.

 

Send your message to this supplier
* Inquiry Title
* Content
* E-mail
* Security Question

Customer Reviews total 0 items

For product pricing, customiztion, or other inquiries

Contact Supplier

Links