Click on the image to view the original image
Support 8192 pixels DMX T-1000S T8000A rgb pixel led controller for project
1.T-8000A-TTLystem features
1. 32—256 Gray level,Support software Gamma correction.
2. Support the rules and special-shaped handle.
3. Eight--port output,every port can support 512-1024 pixels.
4. Off-line (SD Card) control, can be multiple controllers used in combination, play back content stored in the SD card.
5.T-8000A-TTL store a maximum of 16 programs,copy multiple files to the SD card in order,after formatting the SD card as “FAT” format.
6. The program must be named in orders ,just as :00_1.led, 01_1.led, 02_1.led.
7. Compatible with single and dual ICs, if you control a single line IC LED lights, without being connected to the CLK line.
8. New T-8000A-TTL have a screen, the controller can be encrypted to limit the times of use.
NOTE: 1.When T-8000A--TTL controller control less than 512 lamps the frame rate can reach 30fps. When T-8000A-TTL controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.
Trouble shooting:
Question 1:After power,the T-8000S ERROR indicator has been flashing without display output
answer:The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
1)SD card is empty, with no effect file.
2) .The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led.
3).SD card did not format to FAT before copy effect files.
4)Please check the supply power voltage, the controller can be individually powered to exclude power reasons
5)Changing the SD card and then test to exclude the possibility of a bad SD card
Question 2: The controller is powered on, the indicator is normal, but the lamps have no effect change
Answer: The reasons for this are as follows:
1) Check if the lamp′s signal line and the controller connected correctly
2)If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lamp′s and the controller′s ground wire together
3)Check if the model chose during making display files on the SD card match the chips used in the lighting
Question 3:Controller and light connected, after. Lamps flicker. Controller indicator to normal.
Answer:1)The ground wire is not connected between the controller and lighting.
2)The file in SD card is bad, Chip model does not match with the actual.
3)Insufficient power supply.
Question 4:The SD card can not be formatted.
Answer:1) First make sure the SD card on the side of the protection switch is already open.
2) SD card reader is broken
3)Do all of this can’t deal with the question. Change the SD card tests again.
Shenzhen SH LED Technology Co., Ltd. was found in 2009, located in Guanlan Town, Longhua New District, Shenzhen,China. We are a high-tech enterprise who professionally in R & D, producing and marketing departments.With the strong R&D capability, high efficiency management and advanced manufacturing equipments. Our company has consistently uphold the "Unity, Progressive, Pragmatic, Innovative" spirit of enterprise, with the best quality management, abundant technology and perfect after-sale service, win a good reputation in domestic and abroad. We focus on LED Pixel String Light, LED Pixel Light Source, LED Pixel Module, LED Chrstimas Light, LED Amusement Light, 3D Pixel Ball Light etc. The products with high quality, long lifespan, won the trust of the majority of distributors and customers. Shenzhen SH LED Technology Co., Ltd has advanced equipments, perfect management system. We use the best leds such as Cree and Epistar well-known brands. From production to assemble every line are strict accordance with ISO9001:2015,ISO14001:2015 quality system. The products obtained 3C certification in China, European CE & RoHS certification and so on. We committed to be top manufacturer in the LED area.
Q1.Why choose our SH LED CO.,LTD?