Factory Country/Region | Room 4718, Building C2, Wanda Plaza, Xiangjiang Middle Road, Kaifu District, Changsha City, Hunan Province, China |
Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
5Cm LUTONG Tractor Mixer For Sale In Indonesia
Salesman: Lomen Fan
Mobile / Whatsapp / Wechat: +86 191-1893-6257
Sinomada Heavy Industry (Changsha) Co., Ltd.
1. Adopt Xinchai diesel engine, good reliability, large reserves of torque, low fuel consumption, high economic efficiency;
2. Double-function clutch,10 inches, high transmission capacity, reliable, comfortable manipulation;
3. Gearbox using 4 × 3(1 +1) engaging sleeve, shuttle-type gearshift, there are 12 forward gears, 12 reverse gears, reasonable match between the gears, and have high efficiency;
4. Independent power take off device, smooth transmission, large capacity, speed (540/760, 540/1000 r/min) for selection to meet the different operation requirements;
5. Full hydraulic front wheels steering, independent oil circuit for steering system, manipulating flexible, reliable, and save energy;
6. Adopt hydrostaticdisc-type brakes, a large braking torque, the braking effect is good;
The Main Specification of Lutong 70hp to 90hp tractor | |||||
Tractor Model | LT754 | LT804 | LT854 | LT904 | |
General Specification | Driver Type | 4×4 | |||
Length×width×Height(mm) | 4010X1910X2790 | 4396X2038X2810 | |||
Rated Traction force(KN) | 17.3 | 18.6 | 19.7 | 21.3 | |
Steering | hydraulic | ||||
Wheel base(mm) | 2236 | 2195 | |||
Front wheel tread(mm) | 1450 | 1610 | |||
Rear wheel tread(mm) | 1430--1830 | 1620 --2020 | |||
Ground clearance(mm) | 340 | 379 | |||
Engine | Model | YT4B4-22 | 4K41Z31/803 | LR4B5-23 | LR4M5-23 |
Type | Inline,water cooled,four stroke,,direct injection, naturally aspirated | ||||
Marked power (KW) | 55 | 59 | 62.5 | 66.2 | |
Rated revolution (r/min) | 2200 | 2300 | |||
Transmission | Clutch | 12 inches clutch double action | |||
Gear box | Standard:8F+4R (without creeper gear) Optional: 16F+8R | 12F+12R gear | |||
Working device | Control typeof plough depth | Force,place control and floating control | |||
Max.lifting capacity( KN ) | 13.2 | 14.2 | 15 | 15.9 | |
Suspension device type | 3-Point hanging with postposition | ||||
Speed of P.T.O.(r/min) | Stardard:760/850 8 Spine;optional:540/1000 6 Spine | Stardard:760/850 8 Spine;optional:540/1000 or 540/760 6 Spine | |||
P.T.O.power (KW) | 49.8 | 51.2 | 53.1 | 56.3 | |
Specific fuel consumption(g/kw.h) | ≤242 | ||||
Notice:All above parameters are subject to change without notice because of rapid development of products. |
For product pricing, customiztion, or other inquiries
Contact Supplier
Customer Reviews total 0 items