Philips motion sensor -OccuSwitch LRM1071/00 - a smart move

Energy savings of up to 30% and good pay-back
Works with almost all lamp- and luminaire types
Easy to install, enables even faster installation by optional Wieland connectors.

The OccuSwitch family

The OccuSwitch is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30% on electricity The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2. A detachable mains connector enables easy installation and mounting of the OccuSwitch in the ceiling, a separate Wieland cable is available for easy, fast and trouble-free installation

Features

OccuSwitch has a smart timer that will extend the delay time by 10 minutes if movement is detected shortly after switch-off, assuming that the area is still in use but there is very little movement
The OccuSwitch has a retractable shield that can be used to shield off areas, e.g. corridors, adjacent to the area the OccuSwitch is controlling

Applications

The OccuSwitch is designed for use in offices, schools and similar applications, including toilets, storage rooms, etc
It is optimized for recessed ceiling mounting and for mounting heights between 2.5 and 4 meters
The surface box also enables surface mounting, with either recessed wiring or surface-mounted ducts